Sarah "Delilah" Kit model
Alan's Tugs. (Kit Models)
John's Riverman tug. (Scratch Built)
Kim's Odin (Model Kit by Robbie)
George's Tug. (Kit Model)
Anchor Handling Tug/Supply Vessel AZIZ.
he's added many extras to this model. water cannons and detail to the rear deck and over 28 lights.
Scale 1:50. Length 1105mm. Beam 248 mm
model supplier www.modelslipway.com
Taken Sarah only three week to complete her Harbour Tug, Specifications Scale 1/32nd Length 1105mm Beam 292mm A Kit Model from Caldercraft called Marie Felling see video clip
for more info email philandsarah@hullmodelboatgroup.co.uk
or skype me phil & sez below
Smit Zwenden & Rusland these models look fine together.
Taken alan 1year to finnish both Kit models.
email allanwelch@hullmodelboatgroup.co.uk
Kit Supplier www.billingboats.com
Based on Tid 56 Drawing. Scratch built taken 2 years to complete. 36" x 8 1/2 beam. built to 32nd Scale Robbie Navy Compact Motor with 3 to 1 gearbox. Working radar, nav lights, cyclone 6 volt battery pack. a well detailed model.
43" long. 16" Beam, Power 1000 Motor, working Stern Winch, Sea Slug that Fires, 16 Cylinder Diesel Sound Generator, Smoke Generator, Water Cannon works up-down-side to side, Plenty of Lights, Wheel house Depth & Radar Light Up.
email kimbo@hullmodelboatgroup.co.uk
Smit Denemarken.Taken 2-years for him to complete on and off. A well detailed model.
Hight: 52cm Length: 87cm Beam: 27cm.
Model supplier: www.billingboats.com.
Tony Kit Model Harbor Tug, Specifications: Twin screw - Scale 1:32 - Length: (31") - Beam: (9.5") Supplier: Model Slipway
Banckert.Higth: 42cm. Length: 65cm. Beam: 16cm
Scale 1:50
Model Supplier: www.billingboats.com
Yorkshireman / Irishman Salvage Tug
Model Scale 1:48. Length 875 mm. Beam 240 mm approximately 1200 parts to this kit.
Model Supplier: www.modelslipway.com